Correcting a Hobbs or Tach time

Follow

Is your logbook filling in the wrong Hobbs or Tach times? This can be reset in the Aircraft tab.

Automatically filling the last Hobbs/Tach times is controlled by the specific Aircraft ID entry. It's built to only count upwards, so it sounds like the current value was mis-entered at some time, and needs to be corrected.

Go to the AIRCRAFT tab, select the Aircraft ID with the incorrect entries, and you'll see a Hobbs or Tach field (whichever you need). Enter the correct values, and the next flight with this aircraft will auto-fill the correct value.

0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.