How do I Track Positioning (Deadhead) legs?

Follow

Tracking Positioning legs in LogTen Pro is quite easy! This feature is built into our software for ease of use.

Step 1: Log It


All you need to do is to change the Entry Type to Positioning (the U-turn image). You can even enter duty times and a pay rate to track duty pay for commuting if you are lucky enough to be paid for commutes. You may need to enable the Entry Type to show under the Flights section. On a Mac go to Preferences > Flights check the box next to Entry Type.

 

Screen_Shot_2019-06-21_at_7.46.10_PM.png

 


Mac_Deadhead_Type.png


On iOS enable the Entry Type to show by going into any flight and tapping the Action button (3 dots upper right). Then Configure Fields > Configure Section (under Flights) and turning Entry Type to ON.

 

IMG_D3B004530E19-1.jpeg

iOS_Deadhead_Type_X.png

Step 2: Create a Smart Group for Easy Filtering


There isn't really a step 2, but you can go a step further and create a smart group to filter just your deadhead flights. The following smart group shows all the deadheads.

Mac

On the main Flights tab tap the + button at the bottom left corner and select "New Smart Group". IN the "Show .....logbook entry types." dropdown menu select Positioning.

 

Deadhead_Smart_Group_Image.png

On iPhone and iPad

On the Radar tab tap the + button at the top right corner and select "New Smart Group", then configure as pictured.


Deadhead_Smart_Group_iOS.PNG

0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.